|
|
|
|
|
Profiled
Steel Cladding |
| |
| Phoenix
profiles are easy to fix and should be secured using self drilling screws
through the troughs either side of the lap and two fixings through the
centre trough. A full range of accessories including trims, utters, fixing
and soakers, GRP translucent roof lights in either single or double skin
are available. |
 |
| |
|
ROOF
AND CLADDING PROFILES SINGLE SKIN 33MM REVERSE PROFILE FOR SIDE CLADDING
OR DECKING. |
| |
|
|
|
|
| Phoenix
profiles are an economical roof and wall profile. Manufactured by Phoenix
Steels from pre-finished steel coil, the 1000mm cover width ensures easy
on site handling. The wide pan allows for foot trafficking, improved drain
and will provide a weather proof membrane down to a 4" pitch. Phoenix
profiles incorporate a full under-roll side tap lap to give maximum
weather protection. Manufactured from steel, all profiles are designated
as AA to B.S. 476 Part 3 by the deemed to satisfy provisions of The
Building Regulations 1985 Approved Document B, Appendix A, Table A4 Part
II. Profile sheets are also designated as Class 0 to the Building
Regulations by virtue of tests to 8.476 Part 6 ( 1>12>6 ) combined
with a Class 1 surface spread of flame to 8.5. 476 Part 7. For
further details please contact our Sales and Technical information
office. Technical Salesmen and Customer Service Engineers are
available for on site advice. |
|
|
|
ROOF
AND CLADDING PROFILES SINGLE SKIN 26MM REVERSE PROFILE FOR SIDE CLADDING
OR DECKING. |
|
|
|
|
|
|
|
|
|
|
- Address: Phoenix Steels, Speedwell
Road Hay Mills, Yardley, Birmingham B25 8EL.
-
General Information:  sales@phoenixsteels.com
|
| |
|
|
|
|
|
     |
